Z & C Purlins
Secondary members that carry roof and wall panels: purlins on the roof, girts on the walls, eave struts where they meet.
Purlins run across the roof, girts run along the walls, and eave struts join the two at the top of the wall. Together they carry the sheeting and pass its load into the main frames.
- On the roof
- Purlins
- On the walls
- Girts
- Where they meet
- Eave struts
What to tell us
- Roof and wall area to be covered
- Spacing of the main frames
- The type of sheeting you will use

Used in
About Z and C Purlins
Z and C purlins are the secondary members of a steel building. Purlins carry the roof sheets, girts carry the wall sheets and eave struts join the two at the top of the wall.
This page explains what decides their size and spacing, and what to tell us.
Purlin, girt and eave strut
| Member | Where it sits | What it does |
|---|---|---|
| Purlin | Across the roof | Carries the roof sheets |
| Girt | Along the walls | Carries the wall sheets |
| Eave strut | Where the wall meets the roof | Ties the two together at the top of the wall |
Z or C section
- Z purlins usually lapped at the frames to act as continuous members
- C sections simple sections often used as girts and eave struts
- Final choice depends on spans, loads and sheeting
What to tell us
- Roof and wall area
- Spacing of the main frames
- Sheeting type
- Roof slope
Spacing and size
| Factor | Effect |
|---|---|
| Frame spacing | Longer spans need deeper sections |
| Roof load | Wind and sheeting weight set the size |
| Sheet type | Insulated panels weigh more |
| Roof slope | Affects fixing and spacing |
Advantages
Where they are used
Why choose Shamuna
Quick answers
What is the difference between a purlin and a girt?
Purlins run across the roof. Girts run along the walls.
What does an eave strut do?
It joins the wall and roof where they meet at the top of the sidewall.
Should I choose Z or C purlins?
It depends on spans and loads. Give us your frame spacing and sheeting and we will recommend.
Can purlins be supplied for an existing building?
Share your frame spacing and roof area and we will say what we can supply.
How far apart are purlins placed?
It depends on frame spacing, loads and sheeting. We set it in the design.
Last reviewed 20 November 2026 by Shamuna Structures, Bengaluru.

Get a quote